drift flow model meaning in Chinese
漂移怜模型
Examples
- Drift flow model
漂移怜模型 - But the influence trend of the maximum rolling angle and the rolling period was not so simple , it was because the influence of which embodied in the phase relationship of mass flow and the pressure drop across the tube . the d - partition method was developed to separate the test tube into four regions and the drift flow model was imported into the two phase region , based on which the solution of the response of the pressure drop of tested tube to the inlet mass flow perturbation can be obtained
在不摇摆和摇摆工况下，采用d分区法对实验段进行分区，在两相区采用漂移流模型对实验段的压降对入口流速扰动的响应进行了求解，给出了各区压降响应的表达式，进而得到了在不摇摆和摇摆工况下，压降与入口流速扰动之间的传递函数。 - In this dissertation , the experimental study of rolling condition on two - phase flow instabilities of the forced - single - tube circulation system was carried out . furthermore , based on the d - partition method and the hypothesis of drift flow model , given some conservative equation , using the perturbation method the response of the pressure drop of the tube to the inlet flow rate perturbation was analyzed both in rolling condition and in normal upright position
本文主要通过实验对摇摆条件对单管强迫循环中汽液两相流动不稳定性的影响，同时在d分区法的前提下，在两相区基于漂移流模型，一定的守恒条件下，在摇摆和不摇摆工况中用线性小扰动法对实验段的压降对入口流速的扰动的响应进行了分析。